If your radio is equipped with the Voice Selective Call option, your radio can be called individually by another user, or as part of a small group.


Receiving a Voice Selective Call

1. When the radio decodes a Voice Selective Call, the LCD indicates the type of SelCall message being received as follows:

IIndividual call

Group Call

ALL Call

In the case of an Individual Call, you hear two short ringing tortes. For other calls, you hear two medium pitched 'beeps'.

NOTE: Alert tones are not heard if either SelCall Tone Status or Alert Tone VoP ume is set to 'Off'.

2. For an Individual Cal, the radio automatic ally transmits an Acknowledgement message back to the calling radio, If an Acknowledgement ID has been preprogrammed by the dealer. When the radio decodes a Voice Selective Call, it enters the carrier squelch mode for a period of time. If there is no receive activity the radio do resumes the selected squelch mode and the LCD reverts 20 the appropriate ate receive mode display.

IMPORTANT: If you change the selector switch or press any buttons while the Selective Call signal is in progress, the SelCall message disappears and the Select tive Call is lost.


Sending a Voice Selective Call

1. Press and hold PTT, then dial the required Selective Call ID.

2. Release PTT and await a response.

NOTE: For an Individual Call,. the redo Indicates that the call was received with two short ringing tone.