|
Edit
the Channel Scan List
1. Rotate the selector switch
to select the St menu item.
2. Use  or  to scroll through the
channels (01 to 20).
A flashing channel number indicates that the channel is
excluded from the scan list A channel number that lights
oontinuously indicates the channel is included in the scan
list For example, a display showing . with flashing digits
indicates that channel 1B is excluded from the scan list
3. Press the Toggle Light/Enter
Button to toggle the state of a channel in the scan list
from included to excluded, or from excluded to Included.
4.To exit the scan list edit
mode, select another menu item by fuming the selector
switch.
Edit Phone Access/Deaccess
Codes
1. Rotate the selector switch
to select the appropriate menu item.
2. Press any key (except the
Toggle Light/Enter Button) to enter the edit mode, The LCD
displays the currently programmed access/deaccess code. For
a code which exceeds the 6-digit display length, the
rightmost digit flashes to indicate more digits exist on the
right.
You can now change or enter digits as required, up to a
maximum of 8, using any of the numeric keys, as well as the
*,#,A,B,C,and D keys.The flashing cursor indicates the
position of the next digit to be entered
3.To change the access/deaccess
code, Useor to scroll. through the
existing code's digits and  to erase unwanted digits then
enter the new digits. The display shows the new digits as
they are being entered When the flashing cursor is under a
digit the maximum number has been entered.
4. One or more 'pause' digits
can be entered between successive digits of phone access
/deaccess codes by pressing immediately
followed by . A pause digit is
displayed as '-' (a dash). A pause digit causes the radio to
wait in between transmission of the DTMF tones programmed
before and after the pause.
5.Press the Toggle Light/Enter
Button to store the new code and return to the SPM Browse
menu
6.To abort the data entry,
select another menu item by turning the selector switch or
wait until the edit mode times-out (after 5 seconds of
inactivity
Edit Time Out
Timer
This menu item allows you to select the Time Out Timer
length.
1. Rotate the selector switch
to select the Edit Time Out Timer menu item. The menu will
display the current setting: tot. xxx, where xxx represents
one of OFF -01,-02,...,-10. The default display of tot. 01
shows the time out timer setting of one minute.
2. Useor to change the current
status.
3. To exit this menu, select
another menu item by fuming the selector switch.
Set Selective Call Tone
Status
1. Rotate the selector switch.
to choose the 'Selective Call Tone Status' menu item. The
LCD immediately iindicates the current SelCall Tone status
as either Sc-On (On) or Sc-OFF (Off).
2. Useor to toggle between 'On' end
'Off' The new (displayed) status is saved immediately.
3.To exit this menu, select
another menu item by fuming the selector switch.
Set Sidetones
Status
1. Rotate the selector switch
to select the 'Sidetone Status' menu item. The LCD
immediately indicates the currrent Sidetone status as either
St-On (on) St-OFF (Off)
2. Useor to toggle between 'On' and
'off' as required. The new (displayed) status is saved
Immediately.
3. To exit this menu, select
another menu item by turning the selector switch.
Set Alert Tone
Volume
1. Rotate the selector switch
to select the 'Alert Tone' menu item. The LCD immediately
indicates the current Alert Tons status es either Rt-OFF
(Off) or Rt-On (On).
2. Useor to change the cur current
status The new (displayed) status is saved immediately
3. To exit menu, select another
menu item by fuming the selector switch.
|