To Scan Channels

1.Press momentarily to begin channel scanning.

When the 'SCAN' indicator flashes. channel scanning is in progress and the 'Home' channel is displayed (until activity is received on another channel).

2. Initially, the channels are scanned in an increasing order (from lowest to highest). To scan in a decreasing order, rotate the selector switch counter-clockwise To change the direction back to an increasing order. rotate the selector switch clockwise.

The radio scans through all channels that are in the seen list If receive activity is detected on a channel, the 'SCAN' indicator remains on, the channel number is displayed and the conversation can be heard, provided the PL/DPL code (if required) is correct for that channel.

The display reverts to the 'Home' channel and scanning resumes when activity is over and a 7second 'hang time' has expired.

3. To stop scan operation, pressmomentarily.

The 'SCAN' indicator turns off to indicate scanning is terminated and the radio displays the 'Home' channel.


To Transmit During Scanning

1. When keying the radio cor responding to a received message during channel press PTT as you normally would.


Talk Back Scan

The Talk Back Scan feature is used when PTT is pressed while the radio has stopped on a channel When transmit or receive activity ceases on a scanned channel, a "hang time" of approximately 7 seconds occurs prior to the radio resuming scan. This hang time gives the radio time to receive again or gives you time to respond to a call on the locked channel before scanning resumes.


Home Revert Scan

If you press PTT while the he radio is scanning (i.e. the scanner is not locked on any channel), transmission occurs on the "Home" channel (ie. the channel that was active when the scan operation was initiated). After Home transmit and receive activity ceases the radio resumes channel scanning after the hang time has expired.


Nuisance Channel Delete in Scan

When the radio scans to a channel that you do not wish to hear, you can temporarily remove the channel from the scan list using the Nuisance Channel Delete feature.

1. With the scanner locked on the unwanted signal, press and hold for about2 seconds.

2. To add a deleted channel back into the scan list, you must exit and reenter the scan function or turn the radio off and on.