T5600 Console
BASIC BOARD EXTERNAL CONNECTORS and pinouts T-5600 console
Basic Board External Connectors
----------------------------------------------------------------------
Conn. Name Descriptions
----------------------------------------------------------------------
J1 DC PWR Jack
J2 OPTION D-25 genaral connector fo I/O and Special Products (SP)
J3 LINE TB5 line connector, 2/4 wite & protective GND
J4 MIC/PROG TEL-8 connector for Desk Mic, swan-neck mic & programmer
J5 H.SET Handset/headset TEL-4 connector
J6 PATCH TEL-8 phone patch, future option
J7 FOOT SWITCH 3-pin for foot switch (PTT & monitor)
----------------------------------------------------------------------
J1(DC PWR) jack, 15V DC, 3Amp Power in
----------------------------------------------------------------------
Pin Description I/O
----------------------------------------------------------------------
The IN lead is the (-) terminal input
The External terminal is (+)
----------------------------------------------------------------------
J2 (OPTION CONN1) D-25 General connector for I/O
----------------------------------------------------------------------
pin no. Signal name Function I/O
----------------------------------------------------------------------
1 S-SPKR Select Speaker ooo
2 U_S_G Unselect speaker ground for ---
multi-base operation (L478)
3 PAGE AUD Audio Input from external iii
paging terminal, 300mV RMS
4 TXGND Transmit ground ---
5 VBATT Input voltage from battery (+) iii
for backup power supply
6 VPS Output voltage from pwr supply� ooo
7 RX_OUT Receive output signal from ooo
power supply
8 TEST This output is fo Motorola iii
internal testing, for muting
the Select/Unselect speaker
9 LOCL-O Audio output to local deskset ooo
L1473 (no series resitor)
10 EXT ALARM/ Local deskset L1473 input iii
LOCAL PTT (default)/ALM1 (via codeplug
hybrid - see note)
11 HS MUTE High Speed mute input(via iii
codeplug hybrid - see note)
12 N_CLK Notch clock for multi-base iii
operation (Option L478)
13 EX_MON External monitor input iii
14 S_S_G Select Speaker ground ---
15 UNS_S Unselect speaker for Multi base ooo
operation (Option L478)
16 LOCL MIC Audio input from local Deskset iii
L1473
17 EAR_P Earpiece output ooo
18 AUX_RX Auxiliary receive audio iii
unbalanced input
19 SGND Receive audio Ground ---
20 DGND Digital ground/Battery (-) ---
21 N.U. Not Used ---
22 COR Carrier operated relay iii
Unmutereceive path (via
codeplug hybrid - see note)
23 M_LEAD PTT Output, 0.4A open drain ooo
VMOS (20V zener diode protected
24 PAGE PTT PTT input from Pager (via iii
codeplug hybrid - see note)
25 EX_PTT External PTT Input iii
----------------------------------------------------------------------
Note: This type of connection requires Button Expansion Option L979 to be installed in the
controller.
J3 (TB5) Line connection, 2/4 wire & protective GND
----------------------------------------------------------------------
Pin no. Description I/O
----------------------------------------------------------------------
1 2-wire Line 1 Tx & Rx, Tx (DC+) iii/ooo
2 2-wire Line 1 Tx & Rx, Tx (DC-) iii/ooo
3 Protective GND ---
4 4-wire Line 1 Rx only iii
5 4-wire Line 2 Rx only iii
----------------------------------------------------------------------
J4 (TEL-8) Desk Mic and Programmer
----------------------------------------------------------------------
Pin no. Description I/O
----------------------------------------------------------------------
8 10V DC ooo
7 RS-232 host RX ooo
6 Monitor iii
5 TX GND ---
4 MIC HI iii
3 PTT iii
2 RS-232 host TX iii
1 DIGITAL GND ---
----------------------------------------------------------------------
J5 (TEL-4) Handset Connector
----------------------------------------------------------------------
Pin no. Description I/O
----------------------------------------------------------------------
1 TX GND ---
2 PTT/OFF hook iii
3 Earpiece ooo
4 Handset Mic iii
----------------------------------------------------------------------
J7 3-pin Foot switch (PTT & Monitor)
----------------------------------------------------------------------
Pin no. Description I/O
----------------------------------------------------------------------
1 Monitor iii
2 Digital GND ---
3 PTT III
----------------------------------------------------------------------
Home